Our plumbers are available now AEST1300 758 623
Pipe Relining Northern Beaches

Pipe Relining Northern Beaches

We provide pipe relining services across the Northern Beaches, repairing cracked, broken, and tree root-damaged pipes without the need for major excavation. Pipe relining is an effective solution for homes, strata properties, commercial buildings, and heritage homes where digging would be expensive, disruptive, or impractical.

Pipe relining is a no-dig method that repairs damaged pipes from the inside using a structural epoxy liner. We CCTV-inspect the pipe, clean it with high-pressure water, insert a resin-impregnated liner, inflate it against the old pipe wall, and let it cure to form a new pipe within the old one. The result is a smooth, jointless, structural pipe that restores flow and prevents root intrusion for decades — all without digging up your driveway, garden, or slab.

Why choose our pipe relining on the Northern Beaches?

Pipe relining repairs damaged drains without digging them up. If a pipe is cracked, corroded, or filled with tree roots, clearing the blockage only restores the flow temporarily. The damage remains, so the drain is likely to block again. Pipe relining repairs the pipe from the inside, creating a new structural lining that seals cracks, restores the flow, and helps prevent tree roots from returning. Many homes across the Northern Beaches still have ageing clay and cast-iron drains buried beneath driveways, gardens, patios, and building slabs. Replacing these pipes often means excavation, concrete cutting, and costly restoration work. In most cases, we can repair the pipe through existing access points, avoiding major disruption to your property. We specialise in trenchless pipe relining for homes, apartments, strata properties, commercial buildings, and heritage-listed homes across the Northern Beaches. Every pipe relining job includes CCTV inspections before and after the repair, so you can see the condition of the pipe before we start and the finished result once the liner has cured.

How pipe relining works — step by step

The process starts with a thorough CCTV inspection of the damaged pipe. We run a camera through the full length to assess the condition, identify the exact location and extent of damage, and confirm the pipe is structurally suitable for relining. The camera reveals cracks, holes, root entry points, joint misalignment, bellies, and any previous repairs that could affect the relining outcome.

Once the pipe is confirmed suitable, we clean it using high-pressure water jetting with a specialised drain-cleaning nozzle that scours the full internal surface. For heavy root intrusion we use a mechanical chain-knocker or cutter to remove all root mass before jetting. The pipe must be clean and dry for the epoxy resin to bond properly, so this preparation step is critical to the outcome. We then insert the resin-impregnated liner, inflate it using air or water pressure to press it firmly against the host pipe wall, and allow the epoxy to cure. After curing, we run the camera through again to confirm the liner is smooth, free of defects, and properly sealed at both ends.

CCTV inspection comes first — always

No pipe gets relined without a CCTV inspection first. The camera tells us everything we need to know: whether the pipe is structurally sound enough to support a liner, where the damage starts and ends, whether there are bellies or sags where water could pool, whether the joints have shifted, and whether there are any obstructions such as collapsed sections, debris, or displaced fittings that would prevent the liner from passing through.

If the pipe is collapsed, severely deformed, or has large sections of missing wall, relining may not be suitable and targeted excavation and replacement may be the better option. We tell you honestly either way. If relining is viable, we show you the footage, explain what the liner will fix, and provide a fixed quote for the job. You see exactly what we see before you decide, which means there are no surprises about what the work involves or what the cost covers.

Our process

01

CCTV inspection

We inspect the full pipe length with a drain camera to assess condition and confirm relining suitability.

02

Pipe cleaning

We clean the pipe using high-pressure jetting and mechanical tools to remove debris, roots, and scale.

03

Liner installation

We insert the resin-impregnated liner and inflate it against the host pipe wall to form a tight structural fit.

04

Curing & final inspection

The epoxy cures to full strength, then we CCTV-inspect the finished liner to confirm quality and flow.

Transparent pricing

Pipe relining costs depend on the length, diameter, and condition of the pipe, as well as access for the lining equipment. We quote the full job after a CCTV inspection so you know the total cost before we start. No hidden fees, no surprises.

  • Standard residential relining (first 3 m): from $1,980
  • Additional metres: from $550 per metre
  • CCTV inspection: $330 (credited toward relining)
  • Pipe cleaning and preparation: included in relining quote
  • All work guaranteed — 25-year structural warranty on liner

How relining compares to pipe replacement

The main advantage of relining over replacement is that it preserves everything above ground. Driveways, concrete slabs, established gardens, retaining walls, paving, and timber floors all stay exactly where they are. Replacement means excavating the full length of the damaged pipe, cutting through whatever is in the way, and then restoring all the surfaces afterward — which can add days or weeks to the job and thousands of dollars in restoration costs.

Relining also takes less time. A typical residential relining job is completed in a single day, with the pipe returned to service the same afternoon. Replacement of the same section, depending on depth, access, and surface restoration, can take 3-5 days. For properties where the pipe runs under a building slab, replacement may involve cutting through the slab, which is structurally disruptive and expensive. Relining avoids slab penetration entirely.

What happens when relining is not suitable

There are situations where relining is not the right approach. If a pipe has collapsed entirely over a significant length, is severely deformed, or has large sections of pipe wall missing, the liner cannot bridge the gap reliably. In these cases, targeted excavation and replacement of the damaged section is the more durable solution. We always tell you if this is the case, and we show you the CCTV footage so you can see why.

Similarly, if a pipe has multiple severe bellies where standing water will not drain, or if the access points are too restricted for the lining equipment to reach the damaged section, replacement may be the only option. We will quote both options where relining is borderline and let you decide. Our interest is in giving you the most cost-effective, permanent fix for your specific situation, not in selling one solution over another.

Customer Reviews

What They Say About Us

The pipe under our driveway collapsed and two other plumbers wanted to dig up the whole thing. These guys showed us the CCTV footage, explained relining would work, and fixed it in a day. Real professional team, got everything sorted on time with good quality. Would highly recommend

Mark Labow

August 2025

We had a fantastic experience with this northern beaches plumbing pro. They fixed our cracked sewer pipe efficiently without any excavation, saving us a lot of disruption. The team was friendly, professional, kept us informed throughout the process, and delivered an excellent result. We couldn't be happier with the service.

Rona Boussac

January 2026

Fast assessment, clear explanation of what was needed and why, and the job was finished in half a day. No trenching, our garden is untouched, and the pipe flows better than it ever has. Professional from start to finish. They did a great job using the latest equipment. Sensible honest quote and worth every penny. I would trust their advice.

Riley Jo

May 2026

Frequently asked questions

Pipe relining costs on the Northern Beaches typically range from $4,000-8,000 for a standard residential sewer line of 10-20 metres, depending on pipe diameter, number of junctions, and access. This is roughly half the cost of excavation and pipe replacement, which can run $8,000-20,000. The price includes CCTV inspection, pipe cleaning, the epoxy liner, installation, and a 25-year structural warranty. We provide a fixed price quote after the initial CCTV inspection confirms the pipe is suitable for relining.

Pipe relining is a no-dig technique used to repair damaged pipes by creating a strong new pipe inside the existing one, avoiding the need to excavate your property.

A proper drain camera inspection is usually needed to confirm whether the pipe is suitable for relining.

No. Pipe relining can be used to repair sewer pipes, stormwater drains, and many other damaged underground drainage pipes. The pipe needs to be structurally suitable for relining, so we'll inspect it with a CCTV drain camera first and let you know if it's the right repair option.

A properly installed epoxy pipe liner has a design life of 50 years or more. The liner is structural, corrosion-resistant, and jointless, which means tree roots cannot re-enter and the smooth surface prevents future debris buildup. We provide a 25-year structural warranty on all our pipe relining work.

It depends on the condition of the existing pipe. If the pipe is structurally suitable, relining is often an excellent option because it repairs the damage without the need for extensive excavation. If the pipe has collapsed, is severely damaged, or cannot be relined, a full replacement may be the better long-term solution.

Yes, relining is an ideal solution for tree root intrusion. Once we clear the roots with our chain-knocker or high-pressure jetter, the epoxy liner seals the pipe from the inside, creating a smooth surface that roots cannot penetrate. Unlike rodding or jetting alone, which leaves the pipe vulnerable to re-entry, relining provides a permanent barrier against future root ingress.

For a typical residential section of 3-6 metres, the whole process takes 4-6 hours from setup to cure. The CCTV inspection and pipe cleaning are done first, then the liner is inserted and inflated. The epoxy resin cures to full structural strength within 2-4 hours depending on temperature. For longer runs or multiple sections, we allow a full day.

Yes. The epoxy liner conforms to the internal shape of any sound host pipe, regardless of material. We regularly reline clay sewer pipes on Northern Beaches homes, cast-iron waste stacks in heritage properties, and PVC lines in newer homes. The only requirement is that the host pipe is structurally intact enough to support the liner — we confirm this during the CCTV inspection.

Need pipe relining on the Northern Beaches?

We repair cracked, leaking and root-damaged pipes with no-dig relining solutions that restore flow without major excavation. We'll assess your pipe damage with a CCTV inspection, provide a fixed quote, and complete the repair in a single day — all without digging up your driveway or garden.

1300 758 623

Available 24/7 for emergency call-outs across the Northern Beaches.